Description
The Shadow Fan Controller Module
This control module combines volt, water temp and oil temp into one simple interface that allows the driver to always moniter ongoing temperatures and maintain vehicle performance.
The Shadow Fan Controller also contains Signal Feedback Unit. Compared with commercially available fan controllers, this product is more sensitive and is about 15% faster. It also can monitor oil temperature and battery voltage at the same time.
Operation Interface Setting Unit: The user can read the current water temperature value through the operation interface and set the fan startup temperature. When the controller executes or stops the command, the numbers flash to prompt.
Drivers can set the fan start-up temperature by themselves through Shadow engine cooling fan controller. When the water temperature is 5°C lower than the set temperature, the fan will stop running immediately.
Can be set to start at a temperature of 70°C to 100°C.
Monitor water temperature, oil temperature and voltage at the same time.
Warning value setting. The number will start to flash to warn the driver when the specified value is reached.
SPECIFICATION
Power Cable | 50cm |
Control Box – Relay Cable | 180cm |
Relay- Fan Cable | 180cm |
Sensor Cable | 190cm |
Sensor | 1/8NPT |