Description
1.5L Alloy Oil Catch Can with Breather Filter,
Supplied with 2 x 11mm OD and 2 x 15mm OD Fittings,
Sight level and mounting bracket,
Ideal for race application.
Size:
115mm o.d
250mm Overall Height
Related Products
Quick View
NISSAN S13 SILVIA RADIATOR RESERVOIR TANK
Nissan Silvia S13 Aluminum Coolant Overflow Tank Direct Replacement Great upgrade as the factory tank is prone to cracks and leaks, Easy bolt on installation Size:165mm long115mm high143mm wide
Quick View
RADIATOR OVERFLOW CATCH CAN – PRESSURISED – BLACK
1.6L Black Radiator Coolant Reservoir Tank,1.1Bar Pressurised Cap,Aluminum,Size: 20.5cm x 12.5cm x 7.5cm.
Quick View
1.5L ROUND BAFFLED OIL CATCH TANK
1.5L alloy baffled oil catch tank,Rear mounting bracket, Uses 2x AN8 1x AN6 with a 25mm top breather outlet,Constructed with an internal baffle, Size:102mm OD145mm high.
Quick View
2.5L ALLOY FUEL SURGE TANK
2.5l Alloy Fuel surge tank, Fittings- Bottom – 1 x -8 AN Fitting Top – 3 x -6 AN Fitting’s Dimensions – 260mm – Cylinder Height 135mm x 135mm – Base
Quick View
OIL CATCH TANK BLACK
Twin intake racing catch tank with breather filters,Length: 9 in. – Width: 5 in. – Height: 5 in.1 x Billet Battery Tie Down,4 x 10 AN fittings2 x Breather Filters
Quick View
1L SQUARE CATCH CAN WITH BREATHER FILTER
1Ltr Alloy Universal Baffled Oil Catch Tank with Breather & Drain Tap, Female AN-10 inlet/outletMale AN-12 for Breather filter Height : 160mm (excluding filter)Width : 82mmDepth : 82mm
Quick View
3L BAFFLED SQUARE CATCH CAN WITH BREATHER
3 Ltr Alloy Universal Baffled Oil Catch Tank with Breather 2x Female AN-10 inlet/outlet1x Male AN-12 for Breather filter Height : 210mm (excluding filter)Width : 120mmDepth : 120mm
Quick View
500ML ROUND OIL CATCH TANK W/BREATHER
500ml Alloy breather catch tank,Supplied with Hose, mounting tag, magnet oil bung, level guide and breather filter. Diameter : 76mm Overall Height : 187mmBody Height : 138mm
Quick View
ALLOY POWER STEERING TANK
Alloy Power Steering tankDesigned with a special double wall swirl pot structure to suppress swirl effects that result in areduction of air bubbles for more consistent steering performance. Size:88mm o.d170mm High All necessary hardware (mount brackets, clamps, bolts) included.
Quick View
2L Window Washer Tank
2L Window Washer Tank Billet top screw cap Has a single 10mm hole in base with a rubber gromet suitable for a 8 mm push in barb Dimensions – 210mm Long – 110mm Deep – 95mm High
